Product Features:
Full-auto Calibration.
4-Color Printing with AMS lite.
Under 48 dB Low Noise in Silent Mode.
Full-metal Linear Rails and Bearings.
Vibration and Flow Rate Compensation.
Bambu Lab A1 Mini
Plug & Play, High-Speed Precision
🎯 Active Flow Rate Compensation
Revolutionary flow control using a high-frequency eddy current sensor ensures precise extrusion by dynamically adjusting the flow rate.
🔧 Full Auto Calibration
Automatically calibrates Z-offset, bed leveling, vibration resonance, and nozzle pressure before every print—no manual adjustments needed!
⚡ Plug & Play Setup
Pre-assembled, pre-squared, and pre-tuned for precision. Start printing in just 20 minutes.
🔇 Active Motor Noise Cancelling
Automatically fine-tunes each drive motor to reduce unwanted noise for a quieter printing experience.
🔥 High-Speed Precision
With a rigid frame, full-metal rails, pressure sensor, accelerometers, and an advanced motion control system, the A1 Mini prints a 14-minute Benchy while maintaining top-tier quality.
📲 Smart Connectivity
Sync with Bambu Studio and Bambu Handy for remote control, monitoring, and time-lapse recording via the built-in camera.
Technical Specifications
| Feature | A1 Mini Specs |
|---|---|
| Build Volume | 180 × 180 × 180 mm³ |
| Hot End | All-Metal |
| Nozzle | Stainless Steel, 0.4 mm (Included) |
| Max Hot End Temperature | 300°C |
| Max Build Plate Temperature | 80°C |
| Max Speed | 500 mm/s |
| Max Acceleration | 10,000 mm/s² |
| Supported Filaments | PLA, PETG, TPU, PVA (Ideal) |
| Not Recommended | ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymers |
| Camera | Low-framerate (up to 1080p), Time-lapse supported |
| Sensors | Filament Run-out, Filament Tangle, Odometry, Power Loss Recovery |
| Dimensions | A1 Mini: 347 × 315 × 365 mm³ |
| Package Weight | A1 Mini: 8.2 kg / A1 Mini Combo: 10.2 kg |
What’s in the Box?
✅ A1 Mini
✅ Spool Holder
✅ Purge Wiper
✅ Build Plate
✅ PTFE Tube ×1
✅ Bambu Filament Samples (20g, Random Color)
✅ Stainless Steel Nozzle (0.4mm)
✅ Accessory Box
Frequently Asked Questions
1. What’s the difference between AMS and AMS Lite?
AMS Lite is designed for the A1 Mini and is not enclosed.
AMS is enclosed and works with the X1 and P1 series, but not with the A1 Mini.
2. What filaments can the A1 Mini print?
Ideal: PLA, PETG, TPU, PVA
Not Recommended: ABS, ASA, PC, PA, PET (require high bed/chamber temperatures)
3. Does my order include a Mystery Box Components Kit?
A limited number of early purchasers of the A1 Mini Combo will receive a Mystery Box Components Kit as a free bonus (while supplies last).
4. What is the maximum print size of the A1 Mini?
180 × 180 × 180 mm
