Bambu Lab AMS 2 Pro automatic material system for multi-color 3D printing

AMS 2 Pro + Upgrade Kit with Buffer on a white background

AMS 2 Pro + Upgrade Kit with Hub on a white background

AMS 2 Pro + Upgrade Kit with A1 Hub on a white background

Bambu Lab AMS 2 Pro compatible with X1 P1 A1 H2 P2 and X2D printers

AMS 2 Pro multi-material filament system for makers schools and print farms

Bambu Lab AMS 2 Pro – Multi-Material Filament System with Drying & RFID Sync

Roll over image to zoom in Click on image to zoom

Product Features

Active Air Vent 65°C Filament Drying
Air-tight Filament Storage
Up to 24-color/Multi-material Printing
Brushless Servo Feeding Motor
RFID filament sync

Important Notice

The AMS 2 Pro is compatible with multiple Bambu Lab printer series. Some printer models require additional accessories for connection and/or drying. Please choose the option that best matches your printer model and setup needs.

A1 Series

Recommended option: AMS 2 Pro + Upgrade Kit with A1 Hub
- Requires A1 Series AMS Hub to connect AMS 2 Pro unit(s)
- Requires one Switching Adapter per AMS 2 Pro for drying
- Supports up to 4 AMS units total, including AMS HT, AMS, and AMS 2 Pro
Note: AMS Lite cannot be used together with other AMS units.

X1/P1 Series

Recommended option for one unit: AMS 2 Pro + Upgrade Kit with Buffer
- Requires Filament Buffer, PTFE Tube Coupler, and 4-pin Cable
- Requires one Switching Adapter per AMS 2 Pro for drying
- For 2 or more AMS 2 Pro units, choose the AMS 2 Pro + Upgrade Kit with Hub option
- Supports up to 4 AMS units total, including AMS HT, AMS, and AMS 2 Pro
P2S Series
- To connect 1–2 AMS 2 Pro units, a P2S Filament Buffer is required
- To connect 3 or more AMS 2 Pro units, a P2S Filament Buffer and 4-in-1 PTFE Adapter(s) are required
- The printer can power one AMS 2 Pro for drying without a Switching Adapter
- Additional AMS 2 Pro units need their own Switching Adapter for simultaneous drying
- Supports up to 4 AMS units plus 4 AMS HT units
H2S Series
- One AMS 2 Pro: no extra accessory required
- 2 or more AMS 2 Pro units: 4-in-1 PTFE Adapter(s) required
- Supports up to 4 AMS units plus 8 AMS HT units
H2D/H2C Series
- The printer can power one AMS 2 Pro for drying without an extra adapter
- Additional adapters are only needed if drying with multiple AMS 2 Pro units at the same time
- To connect 3 or more AMS 2 Pro units, 4-in-1 PTFE Adapter is required
- Supports up to 4 AMS units plus 8 AMS HT units
X2D Series
- 1–2 AMS 2 Pro units: no extra accessory required
- 3 or more AMS 2 Pro units: 4-in-1 PTFE Adapter required
- The printer can power one AMS 2 Pro for drying without a Switching Adapter
- Additional AMS 2 Pro units need their own Switching Adapter for simultaneous drying
- Supports up to 4 AMS units plus 8 AMS HT units

Overview

The Bambu Lab AMS 2 Pro is an evolved automatic material system designed for multi-color, multi-material, and filament-management workflows. It allows users to print with multiple filaments while also helping keep materials dry and ready for use.

Compared with the first-generation AMS, the AMS 2 Pro adds improved filament drying, sealed storage, faster feeding, tool-free filament tube access, and more durable ceramic filament inlets. It is a strong upgrade for users who print frequently with PLA, PETG, ABS, ASA, support materials, and other compatible filaments.

For makers, schools, print farms, and professional users, the AMS 2 Pro helps reduce filament-handling time and supports more reliable multi-material printing.

Key Features

Multi-Color and Multi-Material Printing

The AMS 2 Pro supports multi-color and multi-material printing with compatible Bambu Lab printers. Multiple AMS 2 Pro and AMS HT units can be connected together for larger filament setups, depending on printer model and accessory configuration.

Integrated Filament Drying

The AMS 2 Pro supports drying temperatures up to 65°C. It helps dry and maintain filament condition before and during supported workflows.

Electro-Magnetic Air Vent

Automated venting helps discharge moisture during drying, then supports sealed storage to help keep filament dry for longer periods.

Auto-Rotate Drying

During drying, filament spools rotate automatically for more even drying performance.

RFID Sync for Bambu Filaments

When using Bambu official filaments with RFID, the AMS 2 Pro can automatically match drying settings, reducing manual setup.

Dry
Moist
Bambu PETG Basic

Faster Filament Feeding

The upgraded brushless motor provides faster filament feeding, helping improve efficiency during frequent filament changes.The powerful Bambu permanent magnet synchronous servo motor accelerates filament feeding by 60% for enhanced efficiency.Saves an average of 10 minutes per 100 filament changes.

Tool-Free Filament Tube Access

The top-access design makes it easier to remove snapped filament from the filament tubes without disassembling the entire unit.

Durable Ceramic Filament Inlets

Ceramic inlets improve durability and help reduce wear during repeated filament feeding.

Sealed Filament Storage

The AMS 2 Pro supports sealed storage and real-time temperature and humidity monitoring through the screen, Bambu Studio, and Bambu Handy.

Faster multi-color printing

Xiaomi Su7 Ultra Prototype by @大匠

Evolved, Polished Design Details

Tool-Free Filament Tubes Access

Removing snapped filament from the first-gen AMS requires extracting all spools and disassembling the shell with two screws, taking 3-5 minutes. In contrast, the AMS 2 Pro offers direct, tool-free access to filament tubes from the top.

Ceramic Inlet

Ceramic filament inlets with Vickers hardness of 1200 significantly enhances durability.

Compatible With All Bambu Lab Printers

The AMS 2 Pro will be compatible with all Bambu Lab products.

AMS 2 Pro Specs

Item		Specification
Body	Dimensions	372280226 mm³
	Net Weight	2.5 kg
	Housing Material	ABS/PC
Printing	Filament Supported	PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMS
	Filament Not Supported	TPE, generic TPU, PVA (damp), BVOH (damp),Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiber
	Filament Diameter	1.75 mm
	Spool Dimension	Width: 50 mm-68 mm Diameter: 197 mm-202 mm
	RFID Identification	Supported
Drying	Highest Temperature	65 °C
	Filament Supported	PLA, PETG, Support for PLA/PETG, ABS, ASA, PET, PA, PC, PVA, BVOH , PP, POM, HIPS, Bambu PLA-CF/ PAHT-CF/ PETG-CF, and TPU for AMS*
	Active Moisture Discharge	Supported
	Sealed Storage	Supported
	Temperature & Humidity Detection	Supported. Real-time temperature and humidity can be displayed on the screen, Bambu Studio, and Bambu Handy.
Power	Input	24 V 4 A

* Filaments marked with * require higher drying temperature. The AMS 2 Pro cannot dry them completely. If you want better drying performance for these filaments, we recommend purchasing an AMS HT.

Best For

Bambu Lab users printing multi-color models
Users who switch filaments often
Makers and hobby users who want better filament management
Schools and STEM labs using Bambu Lab printers
Print farms and frequent users
Users printing PLA, PETG, ABS, ASA, support materials, and selected engineering filaments
Customers who want filament drying and storage in the same system

What’s in the Box

Bambu AMS 2 Pro

Desiccant

PTFE Tube (185mm2+225mm2+900mm*1)

Bambu Bus Cable-6P

For printing, AMS 2 Pro supports many common Bambu-compatible 1.75 mm filaments, including PLA, PETG, ABS, ASA, PET, PA, PC, dry PVA, dry BVOH, PP, POM, HIPS, Bambu PLA-CF, Bambu PAHT-CF, Bambu PETG-CF, Support for PLA/PETG, and TPU for AMS; it does not support TPE, generic TPU, damp PVA, damp BVOH, Bambu PET-CF, Bambu TPU 95A, or other carbon-fiber/glass-fiber filled filaments unless specifically supported.

For higher-temperature drying needs, we recommends using AMS HT for better drying performance.

FAQ

Is the AMS 2 Pro compatible with all Bambu Lab printers?

The AMS 2 Pro is designed to work with Bambu Lab printers, but accessory requirements vary by model. Some printers may require a switching adapter, AMS hub, filament buffer, or other connection accessories.

Can the AMS 2 Pro dry filament by itself?

No. The AMS 2 Pro cannot perform standalone drying without being connected to a printer through the 6-pin bus cable. The printer must be powered on and set to filament drying mode.

Do I need a switching adapter?

It depends on your printer. A1, P1, and X1 series printers require one switching adapter for each AMS 2 Pro unit when using the drying function. H2, P2, and X2D printers can power one AMS 2 Pro unit for drying without a switching adapter.

What filaments are not supported?

The AMS 2 Pro does not support TPE, generic TPU, damp PVA, damp BVOH, Bambu PET-CF, Bambu TPU 95A, or other unsupported carbon-fiber or glass-fiber filled materials.

What is included in the box?

The box includes one AMS 2 Pro, desiccant, PTFE tubes, and a Bambu Bus Cable 6-pin. Additional accessories may be required depending on your printer model and setup.

Bambu Lab AMS 2 Pro – Multi-Material Filament System with Drying & RFID Sync

$454.00 $392.00 Sale

Product Description